Symbol DS7708 - Scan Data Transmission Format

4 - 32 DS7708 2D Vertical Slot Scanner Product Reference Guide
Scan Data Transmission Format
SSI # EBh
Parameter # 235
To set the scan data format, scan one of the following bar codes.
To set values for the prefix and/or suffix, see Prefix/Suffix Values on page 4-29.
Options:
• *Data As Is
• <DATA> <SUFFIX 1>
• <DATA> <SUFFIX 2>
• DATA> <SUFFIX 1> <SUFFIX 2>
• <PREFIX> <DATA >
• <PREFIX> <DATA> <SUFFIX 1>
• <PREFIX> <DATA> <SUFFIX 2>
• <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>.
*Data As Is
(00h)
<DATA> <SUFFIX 1>
(01h)
NOTE If using this parameter do not use ADF rules to set the prefix/suffix.