CHAPTER 9 KEYBOARD WEDGE
INTERFACE
Introduction
This chapter provides information for setting up the scanner with a Keyboard Wedge interface. Use this
interface type to attach the scanner between the keyboard and host computer. The scanner translates bar
code data into keystrokes which the host computer accepts as if they originate from the keyboard.
This mode of operation allows adding bar code reading functionality to a system
designed for manual keyboard
input. In this mode the keyboard keystrokes are simply passed through.
Throughout the programming bar code menus, asterisks (
*) indicate default values.
*No Delay
Feature/Option
* Indicates Default
To Next Page
Loading...
