10 - 24 DS7708 2D Vertical Slot Scanner Product Reference Guide
Host Character Timeout
SSI # EFh
Parameter # 239
This parameter determines the maximum time the decoder waits between characters transmitted by the host
before discarding the received data and declaring an error.
To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes.
Options:
•
*Low - 200 ms
•
Medium - 500 ms
•
High - 750 ms
•
Maximum - 990 ms.
*Low - 200 ms
(14h)
Medium - 50
0 ms
(32h)
NOTE Other values are available via SSI command.
To Next Page
Loading...
