Symbol DS7708 - Convert GS1 DataBar to UPC;EAN

12 - 140 DS7708 2D Vertical Slot Scanner Product Reference Guide
Convert GS1 DataBar to UPC/EAN
SSI # F0h 8Dh
Parameter # 397
This parameter only applies to GS1 DataBar and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. Enable this to strip the leading '010' from DataBar and DataBar Limited symbols encoding
a single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros,
this parameter strips the leading '0100' and
reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and
country code applies to converted bar codes. Note that neither the system character nor the check digit can be
stripped.
Options:
• Enable Convert GS1 DataBar to UPC/EAN
• *Disable Convert GS1 DataBar to UPC/EAN.
Enable Convert GS1 DataBar to UPC/EAN
(01h)
*Disable Convert GS1 DataBar to UPC/EAN
(00h)