USER PREFERENCES & MISCELLANEOUS OPTIONS 4 - 37
Unsolicited Heartbeat Interval
SSI # F8h 04h 5Eh
Parameter # 1118
The scanner supports sending Unsolicited Heartbeat Messages to assist in diagnostics. To enable this feature
and set the desired unsolicited heartbeat interval, scan one of the time interval bar codes below, or scan Set
Another Interval followed by four numeric bar codes from Appendix G, NUMERIC BAR CODES (scan
sequential numbers that correspond to the desired number of seconds).
Options:
•
10 seconds
•
1 minute
•
Set Another Interval
•
*Disable Unsolicited Heartbeat Interval.
Scan Disable Unsolic
ited Heartbeat Interval to turn off the feature.
The heartbeat event is sent as decode data (with no decode beep) in the form of:
MOTEVTHB:nnn
where
nnn is a three digit sequence number starting at 001 and wrapping after 100.
10 seconds
1 minute
To Next Page
Loading...
