Symbol DS7708 - Related Publications; Service Information

x DS7708 2D Vertical Slot Scanner Product Reference Guide
• Numbered lists indicate a set of sequential steps, i.e., those that describe step-by-step procedures.
• Throughout the programming bar code menus, asterisks (*) are used to denote default parameter
settings.
Related Publications
Following is a list of documents that provide additional information about configuring the DS7708:
• DS7708 2D Vertical Slot Scanner Quick Reference Guide, p/n MN001063Axx.
For the latest version of this guide and all guides, go to: htt
p://www.zebra.com/support.
Service Information
If you have a problem using the equipment, contact your facility's technical or systems support. If there is a
problem with the equipment, they will contact the Zebra Technologies Support Center at:
http://www.zebra.com/support.
When contacting Zebra Technologies support, please have the following information available:
• Serial number of the unit
• Model number or product name
• Software type and version number
Zebra Technologies responds to calls by e-mail, telephone or fax with
in the time limits set forth in service
agreements.
If your problem cannot be solved by Zebra Technologies support, you may need to return your equipment for
servicing an
d will be given specific directions. Zebra Technologies is not responsible for any damages incurred
during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void
the warranty.
NOTE This symbol indicates something of special interest to the reader. Failure to read the note will not result in
physical harm to the bar code reader, equipment or data.
IMPORTANT This symbol indicates something of importance to the reader. Failure to read the note may impair
the equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage
may occur.
WARNING! This symbol indicates that if this information is ignored the possibility that serious
personal injury may occur.
*Baud Rate 9600
Feature/Option
* Indicates Default