AUXILIARY SCANNER 11 - 3
Auxiliary RSM Communication Bar Codes
SSI # F8 05 4E
Parameter # 1358
Prior to connecting the auxiliary scanner, scan Disable Aux Scanner RSM Communication when connecting
a Zebra auxiliary scanner that does not support RSM commands. This disables automatic host switching and
RSM communication to the auxiliary scanner.
Disable Aux RSM Communication
(00h)
*Enable Aux RSM Communication
(01h)
NOTE This option is not recommended for Zebra scanners that do support RSM, since an auxiliary scanner
cannot be configured by 123scan
2
with this option selected.
To Next Page
Loading...
