7 - 30 DS7708 2D Vertical Slot Scanner Product Reference Guide
Beep on <BEL>
When this parameter is enabled, the scanner issues a beep when a <BEL> character is detected on the
RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal entry or other important event.
Options:
•
Beep On <BEL> Character (Enable)
•
*Do Not Beep On <BEL> Character (Disable).
Beep On <BEL> Character (Enable)
*Do Not Beep On <BEL> Character (Disable)
To Next Page
Loading...
