4 - 4 DS7708 2D Vertical Slot Scanner Product Reference Guide
User Preferences
Set Default Parameter
You can reset the scanner to two types of defaults: factory defaults or custom defaults. Scan the appropriate
bar code below to reset the scanner to its default settings and/or set its current settings as custom defaults.
Options:
•
*Set Defaults: Scan this bar code to reset all default parameters as follows.
• If you previously set custom defaults by scanning Writ
e to Custom Defaults, scan Set Defaults to
retrieve and restore the scanner custom default settings.
• If you did not set custom defaults, scan Set Defaults to restore the factory default values listed in
Table A-1.
•
Set Factory Defaults: Scan this bar code to restore the factory default values listed in Table A-1. This
deletes any custom defaults set.
•
Write to Custom Defaults: Scan this bar code to set the current scanner settings as custom defaults.
Once set, you can recover custom default settings by scanning Set Defaults.
*Set Defaults
Set Factory Defaults
To Next Page
Loading...
