OCR PROGRAMMING 13 - 3
OCR Programming Parameters
Enable/Disable OCR-A
SSI # F1h A8h
Parameter # 680
To enable or disable OCR-A, scan one of the following bar codes.
Enable OCR-A
*Disable OCR-A
NOTES OCR is not as secure as a bar code. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 13-23 and
OCR Template on page 13-25.
All OCR fonts are disabled by default. Enabling OCR can slow bar code decoding. Enabling more than
one OCR font could also slow OCR decoding and impact OCR decoding accuracy.
To Next Page
Loading...
