Symbol DS7708 - Page 257

SSI INTERFACE 10 - 9
Host Serial Response Time-out 9Bh 155 2 sec 10-22
Host Character Time-out EFh 239 200 msec 10-24
Multipacket Option F0h 4Eh 334 Option 1 10-26
Interpacket Delay F0h 4Fh 335 0 ms 10-28
Event Reporting
Decode Event F0h 00h 256 Disable 10-31
Boot Up Event F0h 02h 258 Disable 10-32
Parameter Event F0h 03h 259 Disable 10-33
Table 10-2 SSI Default Table (Continued)
Parameter
SSI
Number
1
Parameter
Number
2
Default
Page
Number
1
SSI number hex values are used for programming via SSI commands.
2
Parameter number decimal values are used for programming via RSM commands.
NOTE SSI interprets Prefix, Suffix1, and Suffix2 values listed in ASCII Character Set for USB on page 6-33 and
Prefix/Suffix Values on page 7-37 differently than other interfaces. SSI does not recogn
ize key categories,
only the 3-digit decimal value. The default value of 7013 is interpreted as CR only.