Symbol DS7708 - Page 292

12 - 6 DS7708 2D Vertical Slot Scanner Product Reference Guide
GS1 DataBar Limited Security Level F1h D8h 728 3 12-138
GS1 DataBar Expanded (GS1 DataBar
Expanded, GS1 Dat
aBar Expanded Stacked)
F0h 54h 340 Enable 12-137
Convert GS1 DataBar to UPC/EAN F0h 8Dh 397 Disable 12-140
Composite
Composite CC-C F0h 55h 341 Disable 12-141
Composite CC-A/B F0h 56h 342 Disable 12-142
Composite TLC-39 F0h 73h 371 Disable 12-143
UPC Composite Mode F0h 58h 344 UPC Never Linked 12-144
Composite Beep Mode F0h 8Eh 398 Beep As Each Code Type
is Decoded
12-146
GS1-128
Emulation Mode for UCC/EAN
Composite Codes
F0h ABh 427 Di
sable 12-148
2D Symbologies
PDF417 0Fh 15 Enable 12-149
MicroPDF417
E3h 227 Disable 12-150
Code 128 Emulation 7Bh 123 Disable 12-151
Data Matrix F0h 24h 292 Disable 12-152
Data Matrix Inverse F1h 4Ch 588 Inverse Autodetect 12-153
GS1 Data Matrix F8 05 38 1336 Disable 12-155
Decode Mirror Images (Data Matrix Only) F1h 19h 537 Auto 12-156
Maxicode F0h 26h 294 Disable 12-158
QR Code F0h 25h 293 Enable 12-159
QR Inverse F1h 4Bh 587 Regular 12-160
GS1 QR F8 05 3E 1343 Disable 12-162
Micro QR F1h 3Dh 573 Disable 12-163
Aztec F1h 3Eh 574 Disable 12-164
Aztec Inverse F1h 4Dh 589 Inverse Autodetect 12-165
Han Xin F8h 04h 8Fh 1167 Disable 12-167
Han Xin Inverse F8h 04h 90h 1168 Regular 12-168
Table 12-1 Parameter Defaults (Continued)
Parameter
SSI
Number
1
Parameter
Number
2
Default
Page
Number
1
SSI number hex values are used for programming via SSI commands.
2
Parameter number decimal values are used for programming via RSM commands.