MAINTENANCE, TECHNICAL SPECIFICATIONS, MOUNTING TEMPLATES 3 - 3
Bar code is decoded, but not
transmitted to the host.
Scanner is not programmed
for the correct host type.
Scan the appropriate host type bar
code.
Scanned data is incorrectly displayed
on the host.
Scanne
r is not programmed
to work with the host. Check
scanner host type parameters
or editing options.
Ensure proper host is selected.
For RS-232, ensure the scanner’s
communication p
ara
meters match
the host’s settings.
For Keyboard Wedge, ensure
s
canner is
programmed with the
correct country code and that the
CAPS LOCK key is off.
Ensure editing options (for
example., UPCE to UPCA
Conv
ersion) ar
e properly
programmed.
USB host not functioning properly. Scanner does not recognize
host.
Remove and reinsert
the USB cable
and the external power supply, if
applicable.
Table 3-1
Troubleshooting (Continued)
Problem Possible Causes Possible Solutions
To Next Page
Loading...
