Symbol DS7708 - Page 525

STANDARD DEFAULT PARAMETERS A - 9
Postal Codes
US Postnet 59h 89 Disable 12-121
US Planet 5Ah 90 Disable 12-122
Transmit US Postal Check Digit 5Fh 95 Enable 12-123
UK Postal 5Bh 91 Disable 12-124
Transmit UK Postal Check Digit 60h 96 Enable 12-125
Japan Post F0h 22h 290 Disable 12-126
Australia Post F0h 23h 291 Disable 12-127
Australia Post Format F1h CEh 718 Autodiscriminate 12-128
Netherlands KIX Code F0h 46h 326 Disable 12-130
USPS 4CB/One Code/Intelligent Mail F1h 50h 592 Disable 12-131
UPU FICS Postal F1h 63h 611 Disable 12-132
Inverse 1D F1h 4Ah 586 Regular 12-133
GS1 DataBar
GS1 DataBar (GS1 DataBar
Omnidirectional, GS1 DataBar
Truncated, GS1 DataBar Stacked,
GS1
DataBar Stacked Omnidirectional)
F0h 52h 338 Enable 12-135
GS1 DataBar Limited F0h 53h 339 Enable 12-136
GS1 DataBar Expanded (GS1 DataBar
Expanded, GS1 DataBar Expanded
Stacked)
F0h 54h 340 Enable 12-137
GS1 DataBar Limited Security Level F1h D8h 728 3 12-139
Convert GS1 DataBar to UPC/EAN F0h 8Dh 397 Disable 12-140
Composite
Composite CC-C F0h 55h 341 Disable 12-141
Composite CC-A/B F0h 56h 342 Disable 12-142
Composite TLC-39 F0h 73h 371 Disable 12-143
UPC Composite Mode F0h 58h 344 UPC Never Linked 12-144
Composite Beep Mode F0h 8Eh 398 Beep As Each Code
Type is Decoded
12-146
Table A-1 Standard Default Parameters Table (Continued)
Parameter SSI Number
1
Parameter
Number
2
Default
Page
Number
1
SSI number hex values are used for programming via SSI commands.
2
Parameter number decimal values are used for programming via RSM commands.