PROGRAMMING REFERENCE E - 5
D 2 of 5 0 No options specified at this time. Always transmit 0.
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN 0 St
andard data packet in full EAN format, i.e. 13 digit
s for UPC-A,
UPC-E, and EAN-13 (not including supplemental data).
1 Two digit supplemental data only.
2 Five digit supplemental data only.
3 Combined data packet comprising 13 digits from EAN-13, UPC-A
or
UPC-E symbol an
d 2 or 5 digits from supplemental symbol.
4 EAN-8 data packet.
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678
905
Bookland EAN 0 No options specified at this time. Always transmit 0.
Example: A Bookland EAN bar code 123456789X is
transmitted as ]X0123456789X
ISSN EAN 0 No options specified at this time. Always transmit 0.
Example: An ISSN EAN bar code 123456789X is
transmitted as ]X0123456789X
Code 11 0 Single check digit
1 Two check digits
3 Check characters validated but not transmitted.
GS1 DataBar
Family
No option specified at this time. Always tran
smit 0. GS1 DataBar-14
and GS1 DataBar Limited transmit with an Application Identifier
“01”.
Note: In GS1-128 emulation mode, GS1 DataBar is transmitted
using
Code 128 rules (i.e., ]C
1).
Example: A GS1 DataBar
-14 bar code 0110012345678902 is transmitted as
]e00110012345678902.
EAN.UCC
Composites
(GS1 Da
taBar,
GS1-128,
2D portion of
UP
C composite)
Native mo
de transmission.
Note: UPC portion of composite is transmitted us
ing UPC
rules.
0 Standard data packet.
1 Data packet containing the data following an encoded symbol
separa
tor character.
2 Data packet containing the data following an escape mechanism
character
. The data packet does not support the ECI protocol.
3 Data packet containing the data following an escape mechanism
character
. The data packet supports the ECI protocol.
GS1-128 emulation
Note: UPC portion of composite is transmitted us
ing UPC
rules.
1 Data packet is a GS1-128 symbol (i.e., data is preceded with ]JC1).
Table E-3
Modifier Characters (Continued)
Code Type Option Value Option
To Next Page
Loading...
