To Next Page

To Previous Page

TimeHub 5500 TL1 Reference Manual

Commands

097-55501-02 Issue 5: June 2003

SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S

Retrieve Equipment (cont’d)

Note:

For detailed descriptions of keywords, see the Keywords chapter.

RTRV-EQPT[-TSG]:[<tid>]:[<aid>]:<ctag>:::

PARAMETER=<measurement>;

Note:

For detailed descriptions of keywords, see the Keywords chapter.

Command Examples:

RTRV-EQPT::CLK:SC1:::PARAMETER=SYNCMDE;

The command in this example displays the selection algorithm setting.

Parameter Value Variables Description

<event> TRAOOR — Event

<value> See the Keywords chapter

Parameter Value Variables Description

<aid> CLK — Clock card. This parameter is

optional.

IMC Management card. This parameter is

optional.

Sa-OUTb a = 1 Shelf number. This parameter is not

optional.

b = A, B, C, or D Output driver card letter. This

parameter is not optional.

<measurement> FFOF — Fractional Frequency Offset

LMRTIE Latest Maximum Relative Time Interval

Error

MRTIE Maximum Relative Time Interval Error

SPRD Frequency Spread

TDEV Time Deviation

TIE Time Interval Error

<value> See the Keywords chapter

Symmetricom TimeHub 5500 Reference Manual

Other manuals for Symmetricom TimeHub 5500