Symmetricom TimeHub 5500 Reference Manual

2
TimeHub 5500 TL1 Reference Manual
75
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Retrieve Equipment (cont’d)
RTRV-EQPT::CLK:SC1:::PARAMETER=SYNCMDE&MANCHAN;
The command in this example displays the selection algorithm setting and the
selected manual channel number.
RTRV-EQPT::CLK:SC1:::PARAMETER=INPLOS;
The command in this example displays the properties for the Input Loss Of Signal
event.
RTRV-EQPT::OUTA:SC1:::PARAMETER=HLDACT;
The command in this example displays the holdover action setting for output card
A.
RTRV-EQPT::S2-OUTA:SC1:::PARAMETER=HLDACT&AIS;
The command in this example displays the holdover action setting for output card
A of shelf 2 and whether AIS is the normal output for output card A.
RTRV-EQPT::CLK:SC1:::PARAMETER=SPRD-12S;
SYMMBITS 01-05-24 11:25:52
M SC1 COMPLD
"CLK::SPRD-12S = THR-0.000 & CRI-N & RPT-N & PM-M"
;
The command in this example displays the threshold value along with the CRI,
RPT, and PM settings.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English