2
TimeHub 5500 TL1 Reference Manual
95
Commands
097-55501-02 Issue 5: June 2003
2
5
3
SSSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS
Set Attribute (cont’d)
Command Example:
RSET-ATTR:::SC1::MAJOR,INDISQ;
The command in this example sets a major alarm if an INDISQ (Input Channel
Disqualified) event occurs.
Parameter Value Description
<event> IMCRST The network address parameters of the management card
have been changed, and the management card is
reinitializing
INPSSM The SSM value of the indicated input has changed
MEASRNG The input frequency has drifted beyond the measurement
range of the clock card
MEASRP A performance measurement has crossed the indicated
threshold
NETCLOS The Network IMC card is closing the network connection
CLKCDIN A second clock card has been inserted
OPCDIN An output driver card has been inserted in the indicated
location in the shelf
SNSAVL The clock card has been operating continuously for at least
32 h
SNSSM The clock card is using SSM to determine which input
should be tracked
SNOPER The indicated time constant is being used by the clock card
to track the active input
SNTRCK The clock card has begun tracking the indicated input
TRAOOR The value of the Traffic Data Pattern (TRAFFIC) keyword is
invalid for the output driver card type
To Next Page
Loading...
Need help?
General
