Tektronix Keithley 4200A-SCS - Set up Wafer Geometry

Model 4200A-SCS Prober and External Instrument Control Section 9: Using a Cascade Microtech PA200 Prober
4200A-913-01 Rev. A December 2020 9-11
9. From the Interface Configuration dialog box, change Response Terminator to CR.
Figure 139: Interface Configuration dialog box
10. GPIB only: Ensure that the GPIB address matches the address in the configuration file.
11. Click OK.
Set up wafer geometry
On the ProberBench NT computer:
1. Select the ProberBench NT icon (shortcut) on the desktop.
Figure 140: ProberBench NT icon