Tektronix Keithley 4200A-SCS - Connect the 7072 to the DUT

Model 4200A-SCS Prober and External Instrument Control Section 3: Configure and use a Series 700 Switching System
4200A-913-01 Rev. A December 2020 3-3
Connect the 7072 to the DUT
The hardware connections from the 7072 Matrix Card to the 4-terminal MOSFET DUT are shown in
the following figure. Use four triaxial cables to connect to the input terminals of your test fixture. For
systems without a preamplifier, use 4200-MTRX-X triaxial cables. For system with preamplifiers, use
4200-TRX-X triaxial cables.
Figure 30: Connections from the 7072 Matrix Card to the MOSFET DUT