Tektronix Keithley 4200A-SCS - Clarius

Model 4200A-SCS Prober and External Instrument Control Section 11: Using a manual or fake prober
4200A-913-01 Rev. A December 2020 11-9
Clarius
Use Clarius to load and run the probesites or probesubsites project using the new KCon
configuration file, which allows you to execute the project for this prober.
On the 4200A-SCS:
1. Open Clarius.
2. Choose Select.
3. Select Projects.
4. Search for probesubsites.
5. Drag the probesubsites project to the project tree.
Figure 233: probesubsites project tree
6. Click Run.