Tektronix Keithley 4200A-SCS - Signal Paths to a DUT; 4200 A-SCS Signal Paths

Model 4200A-SCS Prober and External Instrument Control Section 2: Using switch matrices
4200A-913-01 Rev. A December 2020 2-17
Signal paths to a DUT
The following figures show signal path examples from the various test instruments through the matrix
switches to a DUT.
4200A-SCS signal paths
The following figure shows remote sensing (4-wire) signal paths through a matrix card using two-pole
switching. Two-pole switching is provided by the 7174A and 7072 (rows A through F).
Figure 16: 4200A-SCS signal paths through a two-pole matrix card using remote sensing