Tektronix Keithley 4200A-SCS - Clarius Probesubsites Project Example

Section 9: Using a Cascade Microtech PA200 Prober Model 4200A-SCS Prober and External Instrument Control
9-22 4200A-913-01 Rev. A December 2020
8. Select File > Project > Save to save the WaferMap configuration.
Figure 160: PA200 WaferMap: Save
Clarius probesubsites project example
The following is a step-by-step procedure to configure the PA-200 so the probesubsites Clarius
project executes successfully.
On the ProberBench NT computer:
1. Select the ProberBench NT icon (shortcut) on the desktop.
Figure 161: ProberBench NT icon