Tektronix Keithley 4200A-SCS - Update Switch Configuration in KCon

Model 4200A-SCS Prober and External Instrument Control Section 3: Configure and use a Series 700 Switching System
4200A-913-01 Rev. A December 2020 3-5
Figure 32: 4200A-SCS to 7072 Matrix Card connections
Update the switch configuration in KCon
After completing the switch and device connections, use KCon to manage the configuration of all
instrumentation controlled by the 4200A-SCS software. You use KCon to:
• Add the switching system to the 4200A-SCS configuration
• Add the test fixture to the system configuration
• Configure the test fixture
• Add a matrix card to the switching system
• Configure the matrix card connections