Tektronix Keithley 4200A-SCS - Clarius

Section 12: Using a Cascade Summit-12000 Prober Model 4200A-SCS Prober and External Instrument Control
12-22 4200A-913-01 Rev. A December 2020
Clarius
Use Clarius to load and run the probesites project using the new KCon configuration file, which
allows you to execute the project for this prober.
On the 4200A-SCS:
1. Open Clarius.
2. Choose Select.
3. Select Projects.
4. Search for probe.
5. Drag the probesites project to the project tree.
Figure 277: probesites project tree
6. Click Run.