Tektronix Keithley 4200A-SCS User Manual

Section 10: Using a Micromanipulator 8860 Prober Model 4200A-SCS Prober and External Instrument Control
10-20 4200A-913-01 Rev. A December 2020
2. Click the Spline Pattern button on the Edit Die Program Parameters window. The Spline Pattern
window opens.
Figure 212: Spline Pattern window
3. Select the spline pattern. The icon of the active spline pattern is transferred to the Edit Die
Program Parameters window, as shown in the following figure.
Figure 213: Edit Die Program Parameters window
4. Click Save on the Die Program Tools window.
5. To open an existing program listing file, click the pcWfr Open button on the Die Program Tools
window. Select the file and click OK.
Before starting testing, physically align the pins over the reference die.

Tektronix Keithley 4200A-SCS Specifications

General

Brand	Tektronix
Model	Keithley 4200A-SCS
Category	Measuring Instruments
Language	English