Tonghui TH2840 Series - Page 160

152
9.2.13.9 FUNCtion parameter function
 Description: Set the "function" parameter of the specified point of the list sweep
Command systax:
:LIST:FUNC:IMP<n>?
:LIST:FUNC:IMP<n><para1,para2,para3,para4>
Parameter:
n---- Specify the index of the sweep point, ranging from 1 to 201
para1,para2,para3,para4 ----Indicate the optional function parameter name, the value is as follows:
Example:
:LIST:FUNC:IMP1 CP,CS,LP,LS ----Set the 4 parameter functions of point 1
:LIST:FUNC:IMP5 CP,CS,LP,LS ----Set the 4 parameter functions of point 5
:LIST:FUNC:IMP100 CP,CS,LP,LS----Set the 4 parameter functions of the 100th point
:LIST:FUNC:IMP1? ----Return to the 4-parameter functions of point 1
 Description: Set the function of list sweep specified parameters, the function of several points
starting from the nth point
Command systax:
:LIST:FUNC:IMP<A|B|C|D><n>?
:LIST:FUNC:IMP<A|B|C|D><n><pn>[,pn+1,pn+2,pn+3….]
Parameter:
A|B|C|D ---- Indicate that one of the 4 parameters is specified
n ---- Specify the index of the sweep point, ranging from 1 to 201
p
n
---- The function name of sweep point n, (refer to the table above)
p
n+1
---- The function name of sweep point n+1
p
n+2
---- The function name of sweep point n+2
p… ---- The function name of sweep point n…
Example:
:LIST:FUNC:IMPA CP,CS,LP ----Set the parameter function of point 1~3 of the first parameter
Parameter
name
Parameter
meaning
Parameter
name
Parameter
meaning
CP
Equivalent parallel
capacitance
CS
Equivalent series
capacitance
LP
Equivalent parallel
inductance
LS
Equivalent series
inductance
RP
Equivalent parallel
resistance
RS
Equivalent series
resistance
GP
Conductance
BP
Susceptance
Z
Absolute value of
impedance
Y
Absolute value of
admittance
D
Loss factor
Q
Quality factor
ZTD/DZ
θz° Impedance degree
ZTR/RZ
θz Impedance radian
YTD/DY
θy°Admittance degree
YTR/RY
θy Admittance radian
X
Reactance
RD
DC Resistance