X35 Monitor Air Seeder Setup
6.58
6.6.6 Accessories
The accessories menu will allow you to set up
features such as sensors, blockage monitoring
system and granular section monitoring.
6.6.6.1 Sensor Setup
Select Implement/Seeder/Accessories/Sensor Setup.
1. Depending on the configuration of the seeding
system, if it has granular ASC, NH3/Liquid
ASC and/or blockage monitoring, air seeders
can have up to three EM-24 ECU’s. Sensor
types for these ECU’s depend on what they are
controlling. These are preset from the factory
profiles so would only need to be modified for
a custom profile.
Figure 6.77 - Accessories Menu
a. If the EM-24 ECU is used for section
control the sensors need be set to Granular
Section Sense.
b. If the EM-24 ECU is used for blockage
monitoring the sensors need to be set to
Blocked Head Sense.
c. Press on the cell marked to change all the
sensor types at once for that particular
EM-24.
To Next Page
Loading...
Need help?
General
