X35 Console Setup
3.5
3.2.1.2 Time/Date
From the Main Setup menu select User/Region/
Time/Date. There are three settings:
1. Date format - select a format for how you
would like the date to appear on the console:
a. 15 Dec, 2012 (Day Month, Year)
or
b. Dec 15, 2012 (Month Day, Year).
Figure 3.7 - Date Format Setting
Figure 3.8 - Time Format Setting
Figure 3.9 - Current Time Setting
2. Time Format - select either:
a. 12-hour format (ex. 2:30 pm)
or
b. 24-hour format (ex. 14:30).
3. Set Current Time - using the numeric keypad
enter time as hh:mm in the format you selected
in the previous step. If the 12-hour format
was selected on the previous step, an am/pm
button will appear on the keypad. Use this
button to set am or pm.
Note
A GPS signal is required to keep a set time/date.
To Next Page
Loading...
