X35 Monitor System Settings
4.17
Alarms are provided as a warning if any
components or functions of the seeding system,
steering, or GPS are not functioning properly. All
alarms are separated into two groups: general
alarms and seeder alarms.
4.4.1 General Alarms
To access general alarms setup, select System/
Alarms/General.
All general alarms are displayed on the left side
of the setup screen in a scroll down list. A green
check mark next to the alarm name indicates that
this alarm is enabled; a red cross indicates that
alarm is disabled.
Figure 4.19 - General Alarms
1. Enabling/Disabling Alarms - all general
alarms can be enabled/disabled all at once or
individually.
a. to enable or disable all general alarms
select All General Alarms (the first item in
the list).
b. to enable or disable individual alarm, select
that alarm from the list.
c. on the right side of the setup screen, select
the Alarm State button to disable or enable
alarm(s).
4.4 Alarms
To Next Page
Loading...
Need help?
General
