X35 ConsoleOptional Equipment
13.20
a. Swipe in from the left edge of the screen
to bring up a access bar.
i. Icons for available features will
appear in the top left portion of the
access panel.
ii. The arrow in the bottom left will
disconnect the Xtend app from the
console.
b. If the device screen times out you will
need to press on the lock icon that appears
to regain control through the Xtend app.
c. If the X35 console is in the Settings menu
you will get a Setup Active message and
will not be able to control anything from
the Xtend app. Go back to the Operation
screen from the X35 console to regain
control with Xtend.
Note
If the Wi-Fi connection is lost on the device, Xtend
will lose connection with the console and the
seeder is forced into a safe state and the master
is shut off to protect the operator. The connection
will need to be regained to continue from the
Xtend device or the console will need to be used.
Note
If your device is connected to the Wireless
Hotspot signal generated by the X35 console it
will not have access to the internet. You will need
to reconnect to the original Wi-Fi signal or shut
off Wi-Fi when not using the Xtend app on your
device to receive data.
Note:
Ensure you disconnect Xtend from the X35
console or close the Xtend app before turning
Wi-Fi off from your device. If you simply shut off
Wi-Fi on your device it will lose connection with
Xtend and force the console into a safe state and
will stop seeding.
Figure 13.25 - Unlocking timed out screen
Figure 13.26 - Setup Active Message
To Next Page
Loading...
