TrendCommunications AuroraPlus - Page 11

Issue 5 - 04/01 vii
Contents
Setting up a User-Defined Bearer Service ...... 4-14
Entering Hexadecimal Numbers ..................................... 4-15
Setting the Bearer Capability
................................. 4-16
Setting the Low Layer Capability
........................... 4-16
Setting the High Layer Capability
.......................... 4-17
Setting the Bearer Service
..................................... 4-17
Channel Setup ................................................................ 4-18
Supplementary Service Selection................................... 4-20
Call Forwarding ................................................... 4-20
Call Deflection .................................................................. 4-29
Keypad Facility
....................................................... 4-30
Malicious Call Identification (MCID) ................................ 4-36
Making a Three Party Call ............................................... 4-37
Setting up CCBS
VN
(Completion of Calls to Busy Subscribers) ................. 4-40
Making a Call with CCBS Enabled ................................. 4-41
CCBS Error Messages .................................................... 4-44
CCBS Options Not Supported by AuroraPlus. ............... 4-44
Suspending and Resuming a Call
........................ 4-44
User-to-User Signalling
......................................... 4-46
Setting up User-to-user Signalling .................................. 4-46
Sending an INVOKE Request .......................................... 4-50
Choosing how AuroraPlus Responds to
UUS INVOKE Requests................................................ 4-52
Test Functions ............................................................ 5-1
Autotest ............................................................................ 5-1
Setting up the Autotest ....................................................... 5-1
Running the Autotest ......................................................... 5-2
Checking the Line Configuration ...................................... 5-3
Automatically configuring the line under test ................... 5-4
Service Check: Determining Available Services................ 5-4
Performing a Local Service Check .................................... 5-5
Performing a Remote Service Check ................................ 5-6
Understanding Service Check Results ............................. 5-6
The X.25 Test .................................................................... 5-7
Testing Fixed Links ........................................................... 5-8
Performing a BER Test ..................................................... 5-8
TOC.p65 30/04/01, 16:257