Setting up your AuroraPlus
Issue 5 - 04/01 3-13
After turning the Tracer on, continue with normal operation
(making calls etc.)
AuroraPlus captures data until the memory
becomes full and
Buffer Full is displayed.
Press CLEAR to exit the Buffer Full Screen.
You can download the trace to a PC running the Trend
AuroraExpert for Windows data analysis package. For
information on downloading the tracer memory to a PC, see
Displaying Tracer Output in Chapter 5.
Entering the Date and Time
Note
If you switch off AuroraPlus the date and time is not updated
while it is switched off, it remains the same as when you
switched it off. The date and time will be lost if the battery
or external power supply fails.
Choose
GENERAL from the SETUP menu.
1 LANGUAGE
2 LOUDSPKR
3 DATE/TIME
4 SELFTEST
Choose DATE/TIME.
DATE:
01/01/1970
TIME:
00:00:12
Press SCROLL to select TIME or DATE.
Enter your settings and press ENTER to save and return to
the
GENERAL screen.
Chap03.P65 30/04/01, 16:3213
To Next Page
Loading...