TrendCommunications AuroraPlus - Call Clearing Cause Codes

To Next Page

To Previous Page

Call Clearing Cause Codes

Issue 5 - 04/01 A4-1

Call Clearing Cause Codes

This Appendix explains the Cause Codes generated by the

remote user or the exchange to which your equipment is

connected. Also explained is the fault location information

provided by

AuroraPlus.

 Note

The Appendix does not cover codes higher than 127. These

are generated by

AuroraPlus itself and are used by Trend

Communications Ltd. for internal diagnostics. You can

normally ignore these codes: however, if they occur

frequently you should consult your Trend dealer or call the

International Help Desk for further assistance.

Cause Codes

Cause

Number Cause

1 Unallocated (unassigned) number

This indicates that the requested destination,

although valid, cannot be reached.

2 No route to specified transit network

Sending equipment (sending the cause) is requested

to route call through an unrecognised transit

network.

3 No route to destination

The called user cannot be reached because the

network does not serve the destination.

6 Channel unacceptable

The last identified channel is not acceptable to the

sending entity.

App04.P65 01/05/01, 09:211