Test Functions
Issue 5 - 04/01 5-7
The X.25 Test
+
The X.25 Test uses SAPI 16 to check the TEIs which are
available for X.25 packet data transfer on the line under test.
Choose
TESTS from the Main Menu.
Choose
X.25 to begin the test:
TEIs 1 to 63 are checked, sequentially. This may take up to
four minutes to complete. Once all the TEIs have been
checked, the first ten available TEIs are displayed.
If no TEIs are available No X.25 TEI Available is displayed.
To abort the test at any time, press ENTER.
Chap05.P65 01/05/01, 09:117
To Next Page
Loading...