Testing on Analogue Lines with AuroraPlus
Issue 5 - 04/01 8-7
Switching between Pulse and DTMF dialling
You can change the dialling type during a call - you might do
this when you are calling through a network to equipment
which uses a different dialling mode.
Active
12345678
Press SCROLL to display the options for a
connected call.
Active
1 Pulse
2 Recall
3 Tone
If the current dial mode is DTMF, you can choose PULSE
from this screen to switch to pulse dialling, as in the above
illustration. If the current mode is Pulse, you can choose
DTMF.
AuroraPlus displays a screen for you to enter a number using
the new dial mode.
Active
12345678
Chap08.P65 01/05/01, 09:167
To Next Page
Loading...