7-6 429850
Trend AuroraPlus User Guide
The feature number and the status of the features is
displayed:
I idle
A Active
? Prompt
P Pending
To move around the feature screen and activate a feature:
Press CLEAR to move the cursor left through the feature
list.
+ Press SHIFT and CLEAR to move the cursor right through
the feature list.
Press SHIFT and SCROLL to move up and down the feature
list.
Press ENTER to send the feature you have selected.
Performing a BER test
When a call has been established you can perform a BER
test.
From the Feature screen, press SCROLL, the following is
displayed:
ON HOOK:1 D
1 BERT
2 HOLD
3 RELEASE
If AuroraPlus
has received a message from the network, D is
displayed at the top of the screen. If the status of a feature
has changed, F is displayed.
Chap07.P65 01/05/01, 09:156
To Next Page
Loading...