Test Functions
Issue 5 - 04/01 5-15
Notes
• Up to 10 BERT results may be stored, providing power
is not removed from the unit.
• If subsequent BER Tests are run
AuroraPlus begins
overwriting the oldest data first.
Displaying Test Results
You can display the last test results which are held in the
unit's memory for as long as the power is switched on. These
include:
• BER Test results
• the last Service Check
• Tracer results
• Autotest results
1 CALLS
2 TESTS
3 AUTOTEST
4 RESULTS
Choose RESULTS from the Main Menu.
1 BERT
2
3 SERVICE
4 TESTREPOR
TRACER
• Choose BERT to display the BERT Results Screen. Refer
to Understanding the BER Test Results in this chapter
for further details.
• Choose
SERVICE to display Service Check results. Refer
to Understanding Service Check Results in this chapter
for further information.
Chap05.P65 01/05/01, 09:1215
To Next Page
Loading...