Test Functions
Issue 5 - 04/01 5-19
Choose CONFIRM to erase the Tracer Decode or ABORT to
retain it.
Note
When you erase the Tracer Decode the Tracer is switched
off. If you want to use the Tracer again you must switch it
on.
Saving Results
As well as saving results in a buffer that is cleared when
AuroraPlus is switched off you can save one set of results in
memory. These results are retained when you switch off
AuroraPlus.
Saving a Set of Results
From the results menu press SCROLL to display further
options:
5 CLEAR BUF
6 SAVE
7 LOAD
Choose SAVE.
The following screen is displayed.
RESULTS
SAVED
Press ENTER to return to the results menu.
Chap05.P65 01/05/01, 09:1219
To Next Page
Loading...