Trend AuroraPlus User Guide
3-6 429850
To disable Call Screening, choose SCRN OFF.
Notes
• To erase one digit at a time press the CLEAR key.
• To append a Sub-address to the CPN or CLI, add a
slash symbol (/) by pressing
+ followed by the
Sub-address.
Address Setup: Setting CPN Sub-address &
CLI
Three types of addresses can be stored in AuroraPlus:
• your own Calling Line Identification (CLI) number.
ISDN lines using the ETSI protocol may be addressed
with several different subscriber numbers. On
Point-to-Multipoint lines this feature is called MSN
(Multiple Subscriber Number). The numbers are
referred to as MSN1, MSN2 etc. On Point-to-Point
lines this feature is called DDI (Direct Dialling
Inward).
• your own Sub-address — Calling Party Sub-address
(CLI-SUB)
• a Called Party Sub-address (CPN-SUB)
These addresses can be stored in addition to outgoing
directory numbers for speed dialling.
AuroraPlus sends CLI and CLI-SUB in the outgoing SETUP
message to the switching system to identify itself.
The Called Party Sub-address (CPN-SUB) is included in an
outgoing SETUP
message only if En Bloc dialling is used.
Choose
ISDN from the Setup menu.
Chap03.P65 30/04/01, 16:316
To Next Page
Loading...