Contents
3.3.3 Main screen views 53
3.3.4 Display brightness 54
3.3.5 Display settings 54
3.3.6 Keypad backlight brightness 54
3.3.7 Lightbar brightness 55
3.3.8 Lightbar tolerances 56
3.3.9 Checking bucket wear 58
3.4 Operating hours 58
3.5 Configuring the machine radio 59
3.5.1 Machine radio configuration 60
3.5.2 Manage frequencies 62
3.5.3 Specify wireless mode 63
3.5.4 Select radio band 64
3.5.5 Configuring a third party radio 64
3.6 Wi-Fi networking 65
3.6.1 Managing Wi-Fi networks 65
3.6.2 Connecting to a Wi-Fi network 66
3.7 Exchanging files with a Connected Community filespace 67
3.7.1 Configuring the Connected Community settings 67
3.7.2 Initiating Connected Community file exchange from the machine 68
3.7.3 Connected Community file synchronization 69
3.7.4 Troubleshooting Connected Community file exchange 70
3.8 Internet Connection Settings 70
3.8.1 Create New 71
3.8.2 Create Custom 72
3.8.3 Delete 73
3.8.4 SIM PIN 73
3.9 Setting depth and slope increment values 74
3.10 Selecting an excavator bucket 74
3.11 Selecting a 3D vertical guidance method 75
3.12 Selecting a 2D guidance method 76
4 Using 2D Guidance in the Field 77
4.1 Setting the focus point 78
4.2 GNSS Receiver Support 78
4.2.1 Bench rotation using two points 79
4.3 Cab Rotation Support 80
4.4 Selecting or creating a guidance model 81
4.4.1 Selecting a 2D guidance method 81
4.4.2 Depth and slope models 82
4.4.3 Depth dual slope models 85
4.4.4 Profile models 87
4.4.5 Alignments with Profiles 92
4.5 Benching the elevation 99
4.6 Establishing an elevation reference 99
12 GCS900 Grade Control System for Excavators Operator's Manual
To Next Page
Loading...
Need help?
General