Tripp Lite B092-016 - Page 110

110
Chapter 6: Secure SSH Tunneling & SDT Connector
 o IfyourdestinationcomputerisseriallyconnectedtotheConsoleServer,settheDestinationas<port
  label>:3389e.g.iftheLabelyouspeciedontheserialportontheConsoleServeriswin2k3,thenspecifythe
  remotehostaswin2k3:3389.AlternativeyoucansettheDestinationasportXX:3389whereXXistheSDT
  enabledserialportnumbere.g.ifport4isontheConsoleServeristocarrytheRDPtrafcthenspecify
port04:3389
Note: http://www.jfitz.com/tips/putty_config.html has useful examples on configuring PuTTY for SSH tunneling
• Select Local and click the Add button
• Click OpentoSSHconnecttheClientPCtotheConsoleServer.YouwillnowbepromptedfortheUsername/Passwordfor
the Console Server user