Tripp Lite B092-016 - Default Chapter; Table of Contents

3
Introduction 10
Installation 14
2.1 Models 14
2.1.1 Kitcomponents:B096-048andB096-016ConsoleServerManagementSwitch 14
2.1.2 Kitcomponents:B092-016ConsoleServerwithPowerAlert 15
2.1.3 Kitcomponents:B095-004-1EandB095-003-1E-MConsoleServer 15
2.1.4 Kitcomponents:B094-008-2E-M-FConsoleServer 16
2.2 Power Connection 17
2.2.1 Power: Console Server Management Switch 17
2.2.2 Power: Console Server with PowerAlert 17
2.2.3 Power: Console Server 17
2.3 Network Connection 17
2.4 Serial Port Connection 18
2.5 USB Port Connection 18
2.6 Rackmount Console / KVM Connection (B092-016 only) 18
System Configuration 19
3.1 Management Console Connection 19
3.1.1 Connected computer set up 19
3.1.2 Browser connection 20
3.1.3 InitialB092-016connection 21
3.2 Administrator Password 22
3.2.1 Set up new administrator 22
3.3 Network IP Address 23
3.3.1 IPv6conguration 24
3.3.2 DynamicDNS(DDNS)conguration 25
3.4 System Service Access 26
3.5 Communications Software 29
3.5.1 SDTConnector 29
3.5.2 PuTTY 29
3.5.3 SSHTerm 30
3.6 Management Network Configuration 31
3.6.1 EnabletheManagementLAN 31
3.6.2 ConguretheDHCPserver 32
3.6.3 SelectFailoverorbroadbandOOB 33
3.6.4 Bridgingthenetworkports 34
3.6.5 WirelessLAN 34
3.6.6 Static routes 35
Table of Contents