Tripp Lite B092-016 - Page 90

90
• OntheAddServicescreen,youcanclickAdd as many times as needed to add multiple new port redirections and
associated clients
You may also specify Advanced port redirection options:
• Enterthelocaladdresstobindtowhencreatingthelocalendpointoftheredirection.Itisnotusuallynecessarytochange
thisfrom"localhost".
• EnteralocalTCPporttobindtowhencreatingthelocalendpointoftheredirection.Ifthisisleftblank,arandomportwill
be selected.
Chapter 6: Secure SSH Tunneling & SDT Connector
Note: SDT Connector can also tunnel UDP services. SDT Connector tunnels the UDP traffic through the TCP SSH
redirection, so in effect it is a tunnel within a tunnel.
Enter the UDP port on which the service is running on the host. This will also be the local UDP port that SDT Connector binds
as the local endpoint of the tunnel.
Note that for UDP services, you still need to specify a TCP port under General. This will be an arbitrary TCP port that is not in
use on the gateway. An example of this is the SOL Proxy service. It redirects local UDP port 623 to remote UDP port 623 over
the arbitrary TCP port 6667