Unipulse F701-C

6.DISCHARGING CONTROL MODE
99
c), d), e)
1) Select setting mode 2.
2) Set Near Zero check at start-time, weight value check at start-time and adjust feeding. (4-
Sequence Mode)
f)
1) Select setting mode 1.
2) Input the Adjust Feeding Time. (4-Adjust Feeding Time)
→→→
F
CNG/ENT CNG/ENT
2
LOWER
(Sequence control)
(Sequence control)
1 : Adjust feeding ON
0 : 〃 OFF
1 : At start-time, weight value
check ON
0 : 〃 OFF
1 : At start-time, Near Zero
check ON
0 : 〃 OFF
→→ →
ZERO
4
SP1
CNG/ENT CNG/ENT
→→→
F CNG/ENT CNG/ENT
1
UPPER
4
SP1
→→ →
Adjust Feeding Time (sec.)
(0.00 ~ 9.99)
CNG/ENT CNG/ENT