6.DISCHARGING CONTROL MODE
98
d) Weight value confirmation at the start of weighing
Confirm whether the weighing value has reached SP1 at the start of weighing.
(select from ON or OFF) If it has, “ ” will be displayed.
Refer to "6-4.Final / Set Point 2 / Set Point 1 / Compensation / Over / Under" on P.86 concerning
Set Point 1 setting.
e) Adjust feeding (Select from ON/OFF)
f) Adjust feeding time (Input range / 0.00 ~ 9.99)
a)
1) Select setting mode 1.
2) Input the Judging Times. (6-Judging Times)
b)
1) Select setting mode 1.
2) Input the Auto Zero Times. (5-Auto Zero Times)
→→→
F
CNG/ENT CNG/ENT
1
UPPER
→→ →
Judging Times
(0 ~ 99)
6
CPS
CNG/ENT CNG/ENT
→→→
F
CNG/ENT CNG/ENT
1
UPPER
→→ →
Auto Zero Times
(0 ~ 99)
CNG/ENT CNG/ENT
5
SP2
To Next Page
Loading...
