Unipulse F701-C

3.METHODS OF SETTING
32
- Function Selection
- Gravitational Acceleration (Area number input)
(For details, please refer to "4-4-7" on P.48.)
- Gravitational Acceleration (Acceleration input)
(For details, please refer to "4-4-7" on P.48.)
Display frequency
3 : 25 times/sec.
2 : 13 times/sec.
1 : 6 times/sec.
0 : 3 times/sec.
Decimal place
1/4 scale division display
1 : ON
0 : OFF
(For details, please refer to
"5-1" on P.55.)
(For details, please refer to
"4-4-3" on P.46.)
(For details, please refer to
"4-4-8" on P.50.)
7
OVER
Subdisplay selection
5 : Near Zero /
Upper Limit /
Lower Limit
4 : Final / Over / Under
3 : Accumulation Count /
Latest Accumulation Data /
Final
2 : Latest Accumulation Data /
Accumulation Value
1 : Accumulation Count /
Accumulation Value
0 : None
(For details, please refer to
"5-2" on P.56.)
Unit
5 : N 4 : lb
3 : kg 2 : g
1 : t 0 : None
(For details, please refer to
"4-4-2" on P.46.)
3 :
2 :
1 :
0 :
When using the F701-C for any balance weight to undergo type approval by the
Measurement Law, set the 1/4 scale division display to OFF. If it is set to OFF,
the “zero point” lights only at a true zero point (0±1/4 scale division).
Request
(0 ～ 16)
8
UNDER
(9.700 ～ 9.999)
．
9
FINAL