Vacon 100 - Page 116

Table 32: Motor control settings
Index Parameter Min Max Unit Default ID Description
P3.1.2.10
Overvoltage Control 0 1 1 607
0 = Disabled
1 = Enabled
P3.1.2.11
Undervoltage Control 0 1 1 608
0 = Disabled
1 = Enabled
P3.1.2.12 Energy Optimization 0 1 0 666
To save energy and to
lower the motor noise,
the drive searches for
the minimum motor
current. You can use
this function for
example in fan and
pump processes. Do
not use the function
with fast PID controlled
processes.
0 = Disabled
1 = Enabled
P3.1.2.13
Stator Voltage Adjust 50.0 150.0 % 100.0 659
Use this to adjust the
stator voltage in
permanent magnet
motors.
P3.1.2.14
Overmodulation 0 1 1 1515
0 = Disabled
1 = Enabled
VACON · 116 PARAMETERS MENU
5
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205