Vacon 100 - Appendix; The Default Values of Parameters in the Different Applications

11 APPENDIX 1
11.1 THE DEFAULT VALUES OF PARAMETERS IN THE DIFFERENT
APPLICATIONS
The explanation of symbols in the table
•
A = Standard application
•
B = Local/ Remote application
•
C = Multi-step speed application
•
D = PID control application
•
E = Multi-purpose application
•
F = Motor potentiometer application
APPENDIX 1 VACON · 337
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
11