2 Find the item that you want to remove. Push the OK
button.
STOP
READY I/O
Favourites
Motor Nom Freq
50.00 Hz
3 Make a selection of Rem from favourites.
STOP
READY I/O
Motor Nom Freq
Rem from favourites
Help
Monitor
4 To remove the item, push the OK button again.
8.3 USER LEVELS
Use the User level parameters to keep the personnel who are not approved from making
changes in the parameters. You can also prevent accidental changes in the parameters.
When you make a selection of a user level, the user cannot see all the parameters on the
display of the control panel.
USER SETTINGS, FAVOURITES AND USER LEVEL MENUS VACON · 221
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
8
To Next Page
Loading...
